Base sections that are flared for added stability are available in the 6' length. Slip resistant material in bottom of base is standard equipment. Safety shoes for the base section may be furnished at extra cost.
The top section of the 6' sectional ladder is available in three models, with notched aluminum roller or ridged vee groove to permit spotting on window structure without interfering with the working area, or with conventional open top. 6' top sections are standard but may also be furnished in 7' or 8' lengths.
Window cleaning ladders manufactured with locking pin assembly installed. This security system will not allow ladders to inadvertantly separate.
*Total length not to exceed 21ft. Locking pins are mandatory.
Top and
center sections are not to be used as bases!
This unique stackable ladder utilizes BOX GIRDER side rail construction, heavy walled rungs and solid cast fittings to provide rigidity and stability when these 4', 5', and 6' lengths are assembled to form the required length of ladder.
 | Easily transported. |
| Sections of 4', 5', or 6' are completely interchangeable. |
| Each unit slides over the top of the one below and is held in place with the use of MANDATORY locking pins. |
| This security system will not allow the ladders to inadvertently separate. |
| Top sections are available in two models, ridged V-groove to permit spotting on window structure without interfering with the work area, or in the conventional open top. |
| 6' top sections are standard but may also be furnished in 7' or 8' lengths |
| Slip resistant end plugs used in bottoms of base are standard equipment. |
| Subtract one foot at each joint to calculate the extended length of the assembled ladders. |
| ASSEMBLED LENGTH NOT TO EXCEED 21 FEET. |
| LOCKING PIN USE IS MANDATORY. |
| Top and Center sections ARE NOT TO BE USED as bases. |
