DESCENDERS

SALE      BELTS & HOLSTERS      BUCKETS      CLEANING SOLUTIONS      CLOTHS      GLOVES & PROTECTIVE WEAR

HIGH RISE EQUIPMENT      LADDERS      MAINTENANCE ITEMS      POLES      RUBBERS      SCRAPERS      SCRUBBERS                 

SOLAR CLEANING      SQUEEGEES      STARTER KITS      TRAINING MATERIALS      WATER-FED POLES & SYSTEMS      HOME

Model MIO-D $320.25

A unique Rope Descender with two built in mechanisms; automatic overspeed control and a lever break control.

Automatic Overspeed Control: The built-in mechanism ensures complete stop in the event the speed goes over the allowed parameters.

Descent control: Lever Break Control Mechanism permits the operator to vary the speed & brake by moving the lever. The user is able to descend from a full "stop" to a full "go".

Rescue position: When used in this mode rescuer gains the ability to fully control victims descent.

(for use with one rope only)

(temporarily out of stock)

SKY GENIE Descent Device $200.00

Manufactured of high strength, light weight aluminum, the Sky Genie allows a preset rate of descent by number of turns around the shaft.  Few turns for rapid descent, more for slower rates.  Descent speed must be controlled by user.

Decelerate or stop descent & remain suspended by applying pressure to free end of line.  Remain in one position by looping free end of line over the top of the Sky Genie.

Unit can be controlled at, above or below point of descent.  Line(s) must be anchored to a point capable of supporting a minimum dead weight of 5,000 pounds.

PETZL ID $225.00

For 7/16" Lines

For 1/2" Lines

smcracks_111x250.gif (10675 bytes)

Made of stainless steel with a welded eye for extra strength.  Average tensile is over 10,000 pounds.

SMC Rappel Rack $51.90

 

Stainless Steel Brake Bars don't leave streaks on your rope & last longer than aluminum bars.  They are available with or without a training groove.

SMC Steel Tie-Off Bar $35.85

 

SMC 3/4" Steel Brake Bar with Angled Slot $12.30

ssbrakebars_105x115.gif (6775 bytes)

SMC 3/4" Steel Brake Bar with Training Groove $12.30

Aluminum Brake Bars give maximum friction & good wear characteristics.

alumbrakebar_90x130.gif (5482 bytes)

SMC 3/4" Aluminum Straight Brake Bar $11.45

alumbrakebar_90x130.gif (5482 bytes)

SMC 3/4" Aluminum Angled Brake Bar $9.85

SMC 3/4" Aluminum Top Brake Bar  $11.45

RA/SMC Steel Figure "8" with ears $91.05